
Male-to-Female Adaptors
Transition between specified male and female connection sizes.
Configuration illustration; supplied variant may differ.
Query product →Adapt hydraulic connections or close unused ports with F-Line adaptors, blanking plugs, port plugs and tube caps. Match the thread, sealing face and intended closure point.
ISO 8434-1 is the equivalent international standard for DIN 2353 24° cone tube connections.


Transition between specified male and female connection sizes.
Configuration illustration; supplied variant may differ.
Query product →
Connect a BSPP port to the required tube or threaded interface.
Configuration illustration; supplied variant may differ.
Query product →
Connect a metric port with the specified pitch and sealing form.
Configuration illustration; supplied variant may differ.
Query product →
Select an adaptor with the required ED seal and mating face.
Configuration illustration; supplied variant may differ.
Query product →
Close a compatible tube fitting connection.
Configuration illustration; supplied variant may differ.
Query product →
Close a specified equipment port with its matched seal.
Configuration illustration; supplied variant may differ.
Query product →
Terminate a tube end using the correct cap assembly.
Configuration illustration; supplied variant may differ.
Query product →Use the Fluidline part number in your enquiry. SS identifies stainless steel in this list; confirm the exact supplied grade and configuration.
Search all 105 Fluidline part numbers → · Browse dimensional tables ↓
For this range, request a Fluidline part number using the configuration and dimensions below.
Choose a configuration to open its drawing and sizes. Linear dimensions are in mm. Upper-case L and lower-case l are different drawing dimensions. A dash means the catalogue does not provide a value.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 51| Fluidline part number | Series | Tube OD (mm) | H | h | K | L | l | T | T1 |
|---|---|---|---|---|---|---|---|---|---|
| On enquiry | L | 6 | 14 | 14 | 14 | 24.5 | 8 | 1/8 | M 12 × 1.5 |
| On enquiry | L | 8 | 17 | 19 | 19 | 29.5 | 12 | 1/4 | M 14 × 1.5 |
| On enquiry | L | 10 | 19 | 19 | 19 | 27.5 | 12 | 1/4 | M 16 × 1.5 |
| On enquiry | L | 12 | 22 | 22 | 22 | 34 | 12 | 3/8 | M 18 × 1.5 |
| On enquiry | L | 15 | 27 | 27 | 27 | 32 | 14 | 1/2 | M 22 × 1.5 |
| On enquiry | L | 18 | 32 | 27 | 27 | 31.5 | 14 | 1/2 | M 26 × 1.5 |
| On enquiry | L | 22 | 36 | 32 | 32 | 32.5 | 16 | 3/4 | M 30 × 2 |
| On enquiry | L | 28 | 41 | 41 | 40 | 35 | 18 | 1 | M 36 × 2 |
| On enquiry | L | 35 | 50 | 50 | 50 | 42.5 | 20 | 1 1/4 | M 45 × 2 |
| On enquiry | L | 42 | 60 | 55 | 55 | 46.5 | 22 | 1 1/2 | M 52 × 2 |
| On enquiry | S | 6 | 17 | 19 | 19 | 27 | 12 | 1/4 | M 14 × 1.5 |
| On enquiry | S | 8 | 19 | 19 | 19 | 29.5 | 12 | 1/4 | M 16 × 1.5 |
| On enquiry | S | 10 | 22 | 22 | 22 | 32 | 12 | 3/8 | M 18 × 1.5 |
| On enquiry | S | 12 | 24 | 22 | 22 | 34 | 12 | 3/8 | M 20 × 1.5 |
| On enquiry | S | 12 | 24 | 27 | 27 | 34.5 | 14 | 1/2 | M 20 × 1.5 |
| On enquiry | S | 14 | 27 | 27 | 27 | 36.5 | 14 | 1/2 | M 22 × 1.5 |
| On enquiry | S | 16 | 30 | 32 | 32 | 39 | 16 | 3/4 | M 24 × 1.5 |
| On enquiry | S | 20 | 36 | 32 | 32 | 43 | 16 | 3/4 | M 30 × 2 |
| On enquiry | S | 25 | 46 | 41 | 40 | 48 | 18 | 1 | M 36 × 2 |
| On enquiry | S | 30 | 50 | 50 | 50 | 51 | 20 | 1 1/4 | M 42 × 2 |
| On enquiry | S | 38 | 60 | 55 | 55 | 60 | 22 | 1 1/2 | M 52 × 2 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 52| Fluidline part number | Series | Tube OD (mm) | H | h | K | L | l | T | T1 |
|---|---|---|---|---|---|---|---|---|---|
| On enquiry | L | 6 | 14 | 14 | 14 | 24.5 | 8 | M 10 × 1 | M 12 × 1.5 |
| On enquiry | L | 8 | 17 | 17 | 17 | 26.5 | 12 | M 12 × 1.5 | M 14 × 1.5 |
| On enquiry | L | 10 | 19 | 19 | 19 | 27.5 | 12 | M 14 × 1.5 | M 16 × 1.5 |
| On enquiry | L | 12 | 22 | 22 | 22 | 30.5 | 12 | M 16 × 1.5 | M 18 × 1.5 |
| On enquiry | L | 15 | 27 | 24 | 24 | 31.5 | 14 | M 18 × 1.5 | M 22 × 1.5 |
| On enquiry | L | 18 | 32 | 27 | 27 | 31.5 | 14 | M 22 × 1.5 | M 26 × 1.5 |
| On enquiry | L | 22 | 36 | 32 | 32 | 32.5 | 16 | M 26 × 1.5 | M 30 × 2 |
| On enquiry | L | 28 | 41 | 41 | 40 | 35 | 18 | M 33 × 2 | M 36 × 2 |
| On enquiry | L | 35 | 50 | 50 | 50 | 42.5 | 20 | M 42 × 2 | M 45 × 2 |
| On enquiry | L | 42 | 60 | 55 | 55 | 46.5 | 22 | M 48 × 2 | M 52 × 2 |
| On enquiry | S | 6 | 17 | 17 | 17 | 27 | 12 | M 12 × 1.5 | M 14 × 1.5 |
| On enquiry | S | 8 | 19 | 19 | 19 | 29.5 | 12 | M 14 × 1.5 | M 16 × 1.5 |
| On enquiry | S | 10 | 22 | 22 | 22 | 32 | 12 | M 16 × 1.5 | M 18 × 1.5 |
| On enquiry | S | 12 | 24 | 24 | 24 | 34 | 12 | M 18 × 1.5 | M 20 × 1.5 |
| On enquiry | S | 14 | 27 | 27 | 27 | 36.5 | 14 | M 20 × 1.5 | M 22 × 1.5 |
| On enquiry | S | 16 | 30 | 27 | 27 | 37 | 14 | M 22 × 1.5 | M 24 × 1.5 |
| On enquiry | S | 20 | 36 | 32 | 32 | 43 | 16 | M 27 × 2 | M 30 × 2 |
| On enquiry | S | 25 | 46 | 41 | 40 | 48 | 18 | M 33 × 2 | M 36 × 2 |
| On enquiry | S | 30 | 50 | 50 | 50 | 51 | 20 | M 42 × 2 | M 45 × 2 |
| On enquiry | S | 38 | 60 | 55 | 55 | 60 | 22 | M 48 × 2 | M 52 × 2 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 60| Fluidline part number | Series | Tube OD (mm) | O-ring | L |
|---|---|---|---|---|
| On enquiry | L | 15 | 12X2 | 20.5 |
| On enquiry | L | 18 | 15X2 | 22.5 |
| On enquiry | L | 22 | 20X2 | 25 |
| On enquiry | L | 28 | 26X2 | 25.5 |
| On enquiry | L | 35 | 32X2.5 | 30 |
| On enquiry | L | 42 | 38X2.5 | 30 |
| On enquiry | L/S | 6 | 4.5X1.5 | 18.5 |
| On enquiry | L/S | 8 | 6.5X1.5 | 18.5 |
| On enquiry | L/S | 10 | 8X1.5 | 20 |
| On enquiry | L/S | 12 | 10X1.5 | 20.5 |
| On enquiry | S | 14 | 11X2 | 22.5 |
| On enquiry | S | 16 | 13X2 | 23.5 |
| On enquiry | S | 20 | 16.3X2.4 | 28.5 |
| On enquiry | S | 25 | 20.3X2.4 | 29 |
| On enquiry | S | 30 | 25.3X2.4 | 30.5 |
| On enquiry | S | 38 | 33.3X2.4 | 33 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 61| Fluidline part number | Series | Tube OD (mm) | H | h | L | l |
|---|---|---|---|---|---|---|
| On enquiry | L | 6 | 14 | 12 | 22 | 7 |
| On enquiry | L | 8 | 17 | 14 | 23 | 8 |
| On enquiry | L | 10 | 19 | 17 | 24 | 9 |
| On enquiry | L | 12 | 22 | 19 | 25 | 10 |
| On enquiry | L | 15 | 27 | 24 | 26 | 11 |
| On enquiry | L | 18 | 32 | 27 | 28 | 11.5 |
| On enquiry | L | 22 | 36 | 32 | 30 | 13.5 |
| On enquiry | L | 28 | 41 | 41 | 31 | 14.5 |
| On enquiry | L | 35 | 50 | 46 | 36 | 14.5 |
| On enquiry | L | 42 | 60 | 55 | 39 | 16 |
| On enquiry | S | 6 | 17 | 14 | 26 | 11 |
| On enquiry | S | 8 | 19 | 17 | 28 | 13 |
| On enquiry | S | 10 | 22 | 19 | 29 | 12.5 |
| On enquiry | S | 12 | 24 | 22 | 31 | 14.5 |
| On enquiry | S | 14 | 27 | 24 | 34 | 16 |
| On enquiry | S | 16 | 30 | 27 | 34 | 15.5 |
| On enquiry | S | 20 | 36 | 32 | 39 | 17.5 |
| On enquiry | S | 25 | 46 | 41 | 44 | 20 |
| On enquiry | S | 30 | 50 | 46 | 47 | 20.5 |
| On enquiry | S | 38 | 60 | 55 | 54 | 23 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 78| Fluidline part number | Series | H | K | L | l | l1 | T | T1 |
|---|---|---|---|---|---|---|---|---|
| On enquiry | - | 22 | 22 | 22.5 | 12 | 8 | 3/8 | 1/8 |
| On enquiry | - | 27 | 26 | 24 | 14 | 8 | 1/2 | 1/8 |
| On enquiry | - | 27 | 26 | 24 | 14 | 12 | 1/2 | 1/4 |
| On enquiry | - | 32 | 32 | 26 | 16 | 12 | 3/4 | 1/4 |
| On enquiry | - | 32 | 32 | 26 | 16 | 12 | 3/4 | 3/8 |
| On enquiry | - | 41 | 39 | 29 | 18 | 12 | 1 | 1/4 |
| On enquiry | - | 41 | 39 | 29 | 18 | 12 | 1 | 3/8 |
| On enquiry | - | 41 | 39 | 29 | 18 | 14 | 1 | 1/2 |
| On enquiry | - | 50 | 49 | 32 | 20 | 14 | 1 1/4 | 1/2 |
| On enquiry | - | 50 | 49 | 32 | 20 | 16 | 1 1/4 | 3/4 |
| On enquiry | - | 55 | 55 | 36 | 22 | 14 | 1 1/2 | 1/2 |
| On enquiry | - | 55 | 55 | 36 | 22 | 16 | 1 1/2 | 3/4 |
| On enquiry | - | 55 | 55 | 36 | 22 | 18 | 1 1/2 | 1 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 79| Fluidline part number | Series | D | H | K | L | l | l1 | T | T1 |
|---|---|---|---|---|---|---|---|---|---|
| On enquiry | - | 4 | 19 | 14 | 31 | 8 | 17 | 1/8 | 1/4 |
| On enquiry | - | 4 | 24 | 14 | 32 | 8 | 17 | 1/8 | 3/8 |
| On enquiry | - | 5 | 19 | 18 | 28 | 12 | 12 | 1/4 | 1/8 |
| On enquiry | - | 5 | 24 | 18 | 36 | 12 | 17 | 1/4 | 3/8 |
| On enquiry | - | 5 | 30 | 18 | 40 | 12 | 20 | 1/4 | 1/2 |
| On enquiry | - | 5 | 36 | 18 | 43 | 12 | 22 | 1/4 | 3/4 |
| On enquiry | - | 8 | 22 | 22 | 36 | 12 | 17 | 3/8 | 1/4 |
| On enquiry | - | 8 | 30 | 22 | 41 | 12 | 20 | 3/8 | 1/2 |
| On enquiry | - | 8 | 36 | 22 | 44 | 12 | 22 | 3/8 | 3/4 |
| On enquiry | - | 12 | 27 | 26 | 36 | 14 | 17 | 1/2 | 3/8 |
| On enquiry | - | 12 | 36 | 26 | 46 | 14 | 22 | 1/2 | 3/4 |
| On enquiry | - | 12 | 41 | 26 | 49 | 14 | 24.5 | 1/2 | 1 |
| On enquiry | - | 10 | 55 | 26 | 53 | 14 | 26.5 | 1/2 | 1 1/4 |
| On enquiry | - | 16 | 32 | 32 | 41 | 16 | 20 | 3/4 | 1/2 |
| On enquiry | - | 16 | 41 | 32 | 51 | 16 | 24.5 | 3/4 | 1 |
| On enquiry | - | 16 | 55 | 32 | 55 | 16 | 26.5 | 3/4 | 1 1/4 |
| On enquiry | - | 16 | 60 | 32 | 57 | 16 | 28.5 | 3/4 | 1 1/2 |
| On enquiry | - | 20 | 41 | 39 | 47 | 18 | 22 | 1 | 3/4 |
| On enquiry | - | 20 | 55 | 39 | 57 | 18 | 26.5 | 1 | 1 1/4 |
| On enquiry | - | 20 | 60 | 39 | 59 | 18 | 28.5 | 1 | 1 1/2 |
| On enquiry | - | 25 | 50 | 49 | 52 | 20 | 24.5 | 1 1/4 | 1 |
| On enquiry | - | 25 | 60 | 49 | 60 | 20 | 28.5 | 1 1/4 | 1 1/2 |
| On enquiry | - | 32 | 55 | 55 | 58 | 22 | 26.5 | 1 1/2 | 1 1/4 |
| On enquiry | - | 40 | 70 | 68 | 62 | 24 | 28.5 | 2 | 1 1/2 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 80| Fluidline part number | Series | H | K | L | l | l1 | T | T1 |
|---|---|---|---|---|---|---|---|---|
| On enquiry | - | 22 | 22 | 22.5 | 12 | 8 | 3/8 | 1/8 |
| On enquiry | - | 27 | 27 | 24 | 14 | 8 | 1/2 | 1/8 |
| On enquiry | - | 27 | 27 | 24 | 14 | 12 | 1/2 | 1/4 |
| On enquiry | - | 32 | 32 | 26 | 16 | 12 | 3/4 | 1/4 |
| On enquiry | - | 32 | 32 | 26 | 16 | 12 | 3/4 | 3/8 |
| On enquiry | - | 41 | 40 | 29 | 18 | 12 | 1 | 1/4 |
| On enquiry | - | 41 | 40 | 29 | 18 | 12 | 1 | 3/8 |
| On enquiry | - | 41 | 40 | 29 | 18 | 14 | 1 | 1/2 |
| On enquiry | - | 50 | 50 | 32 | 20 | 14 | 1 1/4 | 1/2 |
| On enquiry | - | 50 | 50 | 32 | 20 | 16 | 1 1/4 | 3/4 |
| On enquiry | - | 55 | 55 | 36 | 22 | 14 | 1 1/2 | 1/2 |
| On enquiry | - | 55 | 55 | 36 | 22 | 16 | 1 1/2 | 3/4 |
| On enquiry | - | 55 | 55 | 36 | 22 | 18 | 1 1/2 | 1 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 81| Fluidline part number | Series | D | H | K | L | l | l1 | T | T1 |
|---|---|---|---|---|---|---|---|---|---|
| On enquiry | - | 4 | 19 | 14 | 31 | 8 | 17 | 1/8 | 1/4 |
| On enquiry | - | 4 | 24 | 14 | 32 | 8 | 17 | 1/8 | 3/8 |
| On enquiry | - | 5 | 19 | 19 | 29 | 12 | 12 | 1/4 | 1/8 |
| On enquiry | - | 5 | 24 | 19 | 36 | 12 | 17 | 1/4 | 3/8 |
| On enquiry | - | 5 | 30 | 19 | 40 | 12 | 20 | 1/4 | 1/2 |
| On enquiry | - | 5 | 36 | 19 | 43 | 12 | 22 | 1/4 | 3/4 |
| On enquiry | - | 8 | 22 | 22 | 36 | 12 | 17 | 3/8 | 1/4 |
| On enquiry | - | 8 | 30 | 22 | 41 | 12 | 20 | 3/8 | 1/2 |
| On enquiry | - | 8 | 36 | 22 | 44 | 12 | 22 | 3/8 | 3/4 |
| On enquiry | - | 12 | 27 | 27 | 37 | 14 | 17 | 1/2 | 3/8 |
| On enquiry | - | 12 | 36 | 27 | 46 | 14 | 22 | 1/2 | 3/4 |
| On enquiry | - | 12 | 41 | 27 | 49 | 14 | 24.5 | 1/2 | 1 |
| On enquiry | - | 10 | 55 | 27 | 53 | 14 | 26.5 | 1/2 | 1 1/4 |
| On enquiry | - | 16 | 32 | 32 | 43 | 16 | 20 | 3/4 | 1/2 |
| On enquiry | - | 16 | 41 | 32 | 51 | 16 | 24.5 | 3/4 | 1 |
| On enquiry | - | 20 | 41 | 40 | 49 | 18 | 22 | 1 | 3/4 |
| On enquiry | - | 20 | 55 | 40 | 57 | 18 | 26.5 | 1 | 1 1/4 |
| On enquiry | - | 20 | 60 | 40 | 59 | 18 | 28.5 | 1 | 1 1/2 |
| On enquiry | - | 25 | 50 | 50 | 53 | 20 | 24.5 | 1 1/4 | 1 |
| On enquiry | - | 25 | 60 | 50 | 60 | 20 | 28.5 | 1 1/4 | 1 1/2 |
| On enquiry | - | 32 | 55 | 55 | 58 | 22 | 26.5 | 1 1/2 | 1 1/4 |
| On enquiry | - | 40 | 70 | 72 | 65 | 24 | 28.5 | 2 | 1 1/2 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 82| Fluidline part number | Series | T metric | T BSPP | D | H | L | l |
|---|---|---|---|---|---|---|---|
| On enquiry | - | M 10 × 1 | 1/8 | 14 | 5 | 12 | 8 |
| On enquiry | - | M 12 × 1.5 | - | 17 | 6 | 17 | 12 |
| On enquiry | - | M 14 × 1.5 | 1/4 | 19 | 6 | 17 | 12 |
| On enquiry | - | M 16 × 1.5 | 3/8 | 22 | 8 | 17 | 12 |
| On enquiry | - | M 18 × 1.5 | - | 23.9 | 8 | 17 | 12 |
| On enquiry | - | M 20 × 1.5 | - | 25.9 | 10 | 19 | 14 |
| On enquiry | - | M 22 × 1.5 | 1/2 | 27 | 10 | 19 | 14 |
| On enquiry | - | M 26 × 1.5 | - | 31.9 | 12 | 21 | 16 |
| On enquiry | - | M 27 × 2 | 3/4 | 32 | 12 | 21 | 16 |
| On enquiry | - | M 33 × 2 | 1 | 39.9 | 17 | 22.5 | 16 |
| On enquiry | - | M 42 × 2 | 1 1/4 | 49.9 | 22 | 22.5 | 16 |
| On enquiry | - | M 48 × 2 | 1 1/2 | 55 | 24 | 22.5 | 16 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.
Catalogue drawing and table — page 83| Fluidline part number | Series | T | D | H | L | l |
|---|---|---|---|---|---|---|
| On enquiry | - | M 10 × 1 | 13 | 5 | 14 | 10 |
| On enquiry | - | M 12 × 1.5 | 17 | 6 | 16.5 | 11.5 |
| On enquiry | - | M 14 × 1.5 | 19 | 6 | 16.5 | 11.5 |
| On enquiry | - | M 16 × 1.5 | 21 | 6 | 18 | 13 |
| On enquiry | - | M 18 × 1.5 | 23 | 8 | 19.5 | 14.5 |
| On enquiry | - | M 22 × 1.5 | 27 | 10 | 20.5 | 15.5 |
| On enquiry | - | M 26 × 1.5 | 31 | 12 | 21 | 16 |
| On enquiry | - | M 27 × 2 | 32 | 12 | 24 | 19 |
| On enquiry | - | M 33 × 2 | 38 | 17 | 25.5 | 19 |
| On enquiry | - | M 42 × 2 | 48 | 22 | 26 | 19.5 |
Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.
Use adaptors to make a defined transition between connection forms. Use plugs and caps at their intended closure location, with the correct seal and thread engagement.
Specify the tube outside diameter, LL/L/S series, material and every connection. The overall catalogue covers 4–42 mm tube, but an individual configuration may have a narrower range. Carbon steel, 316L and 316Ti can be included in an enquiry, subject to confirmation of the supplied item.
State whether you require complete fittings or bodies only. Include working pressure, peak pressure, temperature, medium and any certificate requirements so the complete assembly can be checked.
Select materials, seals and pressure capability →Additional transition options can be requested where the circuit uses JIC 37° or UNF/UN O-ring boss connections. JIC seals on a flare seat; an O-ring boss connection seals at its specified port. Similar threads do not make the sealing arrangements interchangeable.
Identify a DIN 2353 connection by tube outside diameter, fitting series, thread and sealing form. A matching thread alone does not establish a correct connection.
Select the fitting, tube and seals as one assembly. Pressure capability depends on the exact configuration, material, tube dimensions, temperature and installation method.
Successful cutting-ring connections depend on suitable tubing, matched components, careful preparation and the correct assembly procedure for the supplied fitting system.
Identify the configuration, tube diameter and series, all connection threads and seals, material, quantity and operating conditions. Send a marked sketch when port positions or different end sizes matter.
Use them to identify and enquire about the configuration. Obtain the order-specific drawing and confirmed pressure rating before fabrication or installation.
Send the connection details and operating conditions. Fluidline can confirm the supplied configuration, availability and supporting documentation with your quotation.
+27 11 312 9339
ram@fluidline.co.za · brett@fluidline.co.za
Send your enquiry directly. We save your requirements and email Brett and Ram so they can respond. Privacy information.