Skip to content
F-Line Hydraulic FittingsDIN 2353 · ISO 8434-1
F-Line · HYDRAULIC SYSTEMS & FITTINGS

F-Line DIN 2353 Adjustable Fittings

Use F-Line standpipe and swivel configurations to position elbows, tees and transitions during installation. Select the connection type and orientation before confirming the assembled fitting.

ISO 8434-1 is the equivalent international standard for DIN 2353 24° cone tube connections.

Hydraulic tube fittings including standpipe elbows, tees and threaded connectors
Hydraulic fitting range including standpipe and adjustable configurations. Confirm the exact supplied variant.

What Is an Adjustable DIN 2353 Fitting?

Adjustable DIN 2353 fittings allow an elbow or tee to be oriented during installation before final tightening. Configurations include standpipe elbows, swivel elbows and adjustable tees. Select the correct tube size, series and mating connection for the assembly.

Standpipe vs Swivel Fitting

FeatureStandpipe fittingSwivel-nut fitting
Connection arrangementA projecting standpipe end fits into a compatible fitting body.A swivel nut secures a mating cone connection.
Installation purposePositions the elbow or tee before final tightening.Allows orientation while the connecting nut is tightened.
Selection checksStandpipe diameter, series and mating body.Connection size, series, cone and seal arrangement.

Adjustment is for positioning during installation. These fittings are not intended for continuous rotation during operation. Follow the assembly instructions for the supplied fitting.

Choose a Configuration

F-Line DIN 2353 adjustable elbows with standpipe

Adjustable Elbows with Standpipe

Position a 90-degree elbow using its standpipe connection.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 adjustable branch tees

Adjustable Branch Tees

Place the standpipe on the branch connection of a tee.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 adjustable run tees

Adjustable Run Tees

Place the standpipe on a run connection of a tee.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 swivel adjustable elbows

Swivel Adjustable Elbows

Orient an elbow using a swivel nut and cone connection.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 swivel branch tees

Swivel Branch Tees

Orient a tee through its branch swivel connection.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 swivel run tees

Swivel Run Tees

Orient a tee through a swivel connection on the run.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 swivel unions

Swivel Unions

Join compatible connections through a swivel union assembly.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 swivel adaptors

Swivel Adaptors

Transition from a swivel tube-side connection to a specified port.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 reducing adaptors

Reducing Adaptors

Reduce the connection size using a fixed or swivel arrangement.

Configuration illustration; supplied variant may differ.

Query product →
F-Line DIN 2353 standpipe reducers

Standpipe Reducers

Connect a smaller tube connection through a standpipe reducer.

Configuration illustration; supplied variant may differ.

Query product →
PART NUMBERS & DIMENSIONS

Find Your Fitting by Part Number and Size

Use the Fluidline part number in your enquiry. SS identifies stainless steel in this list; confirm the exact supplied grade and configuration.

Search all 105 Fluidline part numbers → · Browse dimensional tables ↓

Adjustable fittings — Fluidline part numbers
Fluidline part numberDescriptionTube OD (mm)SeriesDimensions
H-EW10L-SS10L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS10LView reference table
H-EW12L-SS12L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS12LView reference table
H-EW15L-SS15L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS15LView reference table
H-EW18L-SS18L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS18LView reference table
H-EW16S-SS16S SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS16SView reference table
H-EW20S-SS20S SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS20SView reference table
H-EW22L-SS22L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS22LView reference table
H-EW25S-SS25S SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS25SView reference table
H-EW28L-SS28L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS28LView reference table
H-EW30S-SS30S SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS30SView reference table
H-EW35L-SS35L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS35LView reference table
H-EW38S-SS38S SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS38SView reference table
H-EW42L-SS42L SWIVEL ADJ ELBOW 24° CONE O-RING DIN2353 SS42LView reference table

Catalogue Dimension Tables

Choose a configuration to open its drawing and sizes. Linear dimensions are in mm. Upper-case L and lower-case l are different drawing dimensions. A dash means the catalogue does not provide a value.

Adjustable elbow with standpipe 20 sizes
Adjustable elbow with standpipe drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 45
Adjustable elbow with standpipe — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)DHhLL1lT
On enquiryL661412272612M 12 × 1.5
On enquiryL8817122927.514M 14 × 1.5
On enquiryL10101914302915M 16 × 1.5
On enquiryL121222173229.517M 18 × 1.5
On enquiryL151527193632.521M 22 × 1.5
On enquiryL181832244035.523.5M 26 × 1.5
On enquiryL222236274438.527.5M 30 × 2
On enquiryL282841364741.530.5M 36 × 2
On enquiryL35355041565134.5M 45 × 2
On enquiryL42426050635640M 52 × 2
On enquiryS661712312716M 14 × 1.5
On enquiryS8819143227.517M 16 × 1.5
On enquiryS10102217343017.5M 18 × 1.5
On enquiryS12122417383121.5M 20 × 1.5
On enquiryS14142719403522M 22 × 1.5
On enquiryS161630244336.524.5M 24 × 1.5
On enquiryS202036274844.526.5M 30 × 2
On enquiryS25254636545030M 36 × 2
On enquiryS30305041625535.5M 42 × 2
On enquiryS38386050726341M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Adjustable branch tee with standpipe 20 sizes
Adjustable branch tee with standpipe drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 46
Adjustable branch tee with standpipe — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)DHhLL1lT
On enquiryL661412272612M 12 × 1.5
On enquiryL8817122927.514M 14 × 1.5
On enquiryL10101914302915M 16 × 1.5
On enquiryL121222173229.517M 18 × 1.5
On enquiryL151527193632.521M 22 × 1.5
On enquiryL181832244035.523.5M 26 × 1.5
On enquiryL222236274438.527.5M 30 × 2
On enquiryL282841364741.530.5M 36 × 2
On enquiryL35355041565134.5M 45 × 2
On enquiryL42426050635640M 52 × 2
On enquiryS661712312716M 14 × 1.5
On enquiryS8819143227.517M 16 × 1.5
On enquiryS10102217343017.5M 18 × 1.5
On enquiryS12122417383121.5M 20 × 1.5
On enquiryS14142719403522M 22 × 1.5
On enquiryS161630244336.524.5M 24 × 1.5
On enquiryS202036274844.526.5M 30 × 2
On enquiryS25254636545030M 36 × 2
On enquiryS30305041625535.5M 42 × 2
On enquiryS38386050726341M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Adjustable run tee with standpipe 20 sizes
Adjustable run tee with standpipe drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 47
Adjustable run tee with standpipe — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)DhHLL1ll1T
On enquiryL66121427531226M 12 × 1.5
On enquiryL88121729561427.5M 14 × 1.5
On enquiryL1010141930591529M 16 × 1.5
On enquiryL1212172232621729.5M 18 × 1.5
On enquiryL1515192736692132.5M 22 × 1.5
On enquiryL18182432407523.535.5M 26 × 1.5
On enquiryL22222736448327.538.5M 30 × 2
On enquiryL28283641479130.541.5M 36 × 2
On enquiryL353541505611134.551M 45 × 2
On enquiryL42425060631234056M 52 × 2
On enquiryS66121731581627M 14 × 1.5
On enquiryS88141932611727.5M 16 × 1.5
On enquiryS10101722346617.530M 18 × 1.5
On enquiryS12121724387121.531M 20 × 1.5
On enquiryS1414192740752235M 22 × 1.5
On enquiryS16162430437924.536.5M 24 × 1.5
On enquiryS20202736489326.544.5M 30 × 2
On enquiryS25253646541053050M 36 × 2
On enquiryS303041506211935.555M 42 × 2
On enquiryS38385060721384163M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Swivel adjustable elbow with cone 20 sizes
Swivel adjustable elbow with cone drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 48
Swivel adjustable elbow with cone — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)HhLll1T
On enquiryL61412271226M 12 × 1.5
On enquiryL81712291427.5M 14 × 1.5
H-EW10L-SSL101914301529M 16 × 1.5
H-EW12L-SSL122217321729.5M 18 × 1.5
H-EW15L-SSL152719362132.5M 22 × 1.5
H-EW18L-SSL1832244023.535.5M 26 × 1.5
H-EW22L-SSL2236274427.538.5M 30 × 2
H-EW28L-SSL2841364730.541.5M 36 × 2
H-EW35L-SSL3550415634.551M 45 × 2
H-EW42L-SSL426050634056M 52 × 2
On enquiryS61712311627M 14 × 1.5
On enquiryS81914321727.5M 16 × 1.5
On enquiryS1022173417.530M 18 × 1.5
On enquiryS1224173821.531M 20 × 1.5
On enquiryS142719402235M 22 × 1.5
H-EW16S-SSS1630244324.536.5M 24 × 1.5
H-EW20S-SSS2036274826.544.5M 30 × 2
H-EW25S-SSS254636543050M 36 × 2
H-EW30S-SSS3050416235.555M 42 × 2
H-EW38S-SSS386050724163M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Swivel adjustable branch tee with cone 20 sizes
Swivel adjustable branch tee with cone drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 49
Swivel adjustable branch tee with cone — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)HhLL1lT
On enquiryL61412272612M 12 × 1.5
On enquiryL817122927.514M 14 × 1.5
On enquiryL101914302915M 16 × 1.5
On enquiryL1222173229.517M 18 × 1.5
On enquiryL1527193632.521M 22 × 1.5
On enquiryL1832244035.523.5M 26 × 1.5
On enquiryL2236274438.527.5M 30 × 2
On enquiryL2841364741.530.5M 36 × 2
On enquiryL355041565134.5M 45 × 2
On enquiryL426050635640M 52 × 2
On enquiryS61712312716M 14 × 1.5
On enquiryS819143227.517M 16 × 1.5
On enquiryS102217343017.5M 18 × 1.5
On enquiryS122417383121.5M 20 × 1.5
On enquiryS142719403522M 22 × 1.5
On enquiryS1630244336.524.5M 24 × 1.5
On enquiryS2036274844.526.5M 30 × 2
On enquiryS254636545030M 36 × 2
On enquiryS305041625535.5M 42 × 2
On enquiryS386050726341M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Swivel adjustable run tee with cone 20 sizes
Swivel adjustable run tee with cone drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 50
Swivel adjustable run tee with cone — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)HhLL1ll1T
On enquiryL6141227531226M 12 × 1.5
On enquiryL8171229561427.5M 14 × 1.5
On enquiryL10191430591529M 16 × 1.5
On enquiryL12221732611729.5M 18 × 1.5
On enquiryL15271936692132.5M 22 × 1.5
On enquiryL183224407523.535.5M 26 × 1.5
On enquiryL223627448227.538.5M 30 × 2
On enquiryL284136478930.541.5M 36 × 2
On enquiryL3550415610734.551M 45 × 2
On enquiryL426050631194056M 52 × 2
On enquiryS6171231581627M 14 × 1.5
On enquiryS8191432591727.5M 16 × 1.5
On enquiryS102217346417.530M 18 × 1.5
On enquiryS122417386921.531M 20 × 1.5
On enquiryS14271940752235M 22 × 1.5
On enquiryS163024437924.536.5M 24 × 1.5
On enquiryS203627489326.544.5M 30 × 2
On enquiryS254636541043050M 36 × 2
On enquiryS3050416211735.555M 42 × 2
On enquiryS386050721354163M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

BSPP swivel adaptor 20 sizes
BSPP swivel adaptor drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 53
BSPP swivel adaptor — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)HhKLlTT1
On enquiryL614141424.581/8M 12 × 1.5
On enquiryL817191929.5121/4M 14 × 1.5
On enquiryL1019191927.5121/4M 16 × 1.5
On enquiryL1222222234123/8M 18 × 1.5
On enquiryL1527272732141/2M 22 × 1.5
On enquiryL1832272731.5141/2M 26 × 1.5
On enquiryL2236323232.5163/4M 30 × 2
On enquiryL2841414035181M 36 × 2
On enquiryL3550505042.5201 1/4M 45 × 2
On enquiryL4260555546.5221 1/2M 52 × 2
On enquiryS617191927121/4M 14 × 1.5
On enquiryS819191929.5121/4M 16 × 1.5
On enquiryS1022222232123/8M 18 × 1.5
On enquiryS1224222234123/8M 20 × 1.5
On enquiryS1427272736.5141/2M 22 × 1.5
On enquiryS1630272737141/2M 24 × 1.5
On enquiryS2036323243163/4M 30 × 2
On enquiryS2546414048181M 36 × 2
On enquiryS3050505051201-1/4M 42 × 2
On enquiryS3860555560221-1/2M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Metric swivel adaptor 19 sizes
Metric swivel adaptor drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 54
Metric swivel adaptor — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)HhKLlTT1
On enquiryL614141424.58M 10 × 1M 12 × 1.5
On enquiryL817191726.512M 12 × 1.5M 14 × 1.5
On enquiryL1019191927.512M 14 × 1.5M 16 × 1.5
On enquiryL1222222230.512M 16 × 1.5M 18 × 1.5
On enquiryL1527242431.514M 18 × 1.5M 22 × 1.5
On enquiryL1832272731.514M 22 × 1.5M 26 × 1.5
On enquiryL2236323232.516M 26 × 1.5M 30 × 2
On enquiryL284141403518M 33 × 2M 36 × 2
On enquiryL3550505042.520M 42 × 2M 45 × 2
On enquiryL4260555546.522M 48 × 2M 52 × 2
On enquiryS61717172712M 12 × 1.5M 14 × 1.5
On enquiryS819191929.512M 14 × 1.5M 16 × 1.5
On enquiryS102222223212M 16 × 1.5M 18 × 1.5
On enquiryS122424243412M 18 × 1.5M 20 × 1.5
On enquiryS1427272636.514M 20 × 1.5M 22 × 1.5
On enquiryS163027273714M 22 × 1.5M 24 × 1.5
On enquiryS203632324316M 27 × 2M 30 × 2
On enquiryS254641404818M 33 × 2M 36 × 2
On enquiryS386055556022M 48 × 2M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Swivel union with cone 19 sizes
Swivel union with cone drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 55
Swivel union with cone — reference dimensions (mm)
Fluidline part numberSeriesTube OD (mm)HLl1l2
On enquiryL614643634
On enquiryL817643634
On enquiryL1019673736
On enquiryL1222713736
On enquiryL1527824039
On enquiryL22361024745
On enquiryL28411104947
On enquiryL35501275853
On enquiryL42601395953
On enquiryS617713937
On enquiryS819733937
On enquiryS1022784341
On enquiryS1224874443
On enquiryS1427924845
On enquiryS1630995046
On enquiryS20361136055
On enquiryS25461266658
On enquiryS30501447362
On enquiryS38601658367

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Standpipe reducer, light 8 sizes
Standpipe reducer, light drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 62
Standpipe reducer, light — reference dimensions (mm)
Fluidline part numberSeriesD1D2H1H2LlT
On enquiryL8617143823.5M 14 × 1.5
On enquiryL12622143823.5M 18 × 1.5
On enquiryL15627143823.5M 22 × 1.5
On enquiryL18632143924.5M 26 × 1.5
On enquiryL22636144025.5M 30 × 2
On enquiryL28641144126.5M 36 × 2
On enquiryL35650144631.5M 45 × 2
On enquiryL421060194833.5M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Standpipe reducer, heavy 9 sizes
Standpipe reducer, heavy drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 63
Standpipe reducer, heavy — reference dimensions (mm)
Fluidline part numberSeriesD1D2H1H2LlT
On enquiryS8619174025M 16 × 1.5
On enquiryS10622174126M 18 × 1.5
On enquiryS12622174227M 20 × 1.5
On enquiryS14627174429M 22 × 1.5
On enquiryS16630174429M 24 × 1.5
On enquiryS20636175234M 30 × 2
On enquiryS25646174937M 36 × 2
On enquiryS30650175439M 42 × 2
On enquiryS38660175843M 52 × 2

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Reducer, light 9 sizes
Reducer, light drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 64
Reducer, light — reference dimensions (mm)
Fluidline part numberSeriesD1D2HhLl
On enquiryL8614144025.5
On enquiryL10614144227.5
On enquiryL12614144227.5
On enquiryL15614174429
On enquiryL18614194631
On enquiryL22614244833
On enquiryL28614304833
On enquiryL35614365338.5
On enquiryL42614465641

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Reducer, heavy 9 sizes
Reducer, heavy drawing with dimension labels

Dimensions in millimetres. Thread designations are shown separately. Match the letters to the drawing.

Catalogue drawing and table — page 65
Reducer, heavy — reference dimensions (mm)
Fluidline part numberSeriesD1D2HhLl
On enquiryS8617174328
On enquiryS10617174530.5
On enquiryS12617174732.5
On enquiryS14617175136.5
On enquiryS16617175338.5
On enquiryS20617225843
On enquiryS25617276247.5
On enquiryS30617326752
On enquiryS38617417257

Reference dimensions support selection. Confirm the supplied item drawing, material, seals and permissible operating conditions with your quotation.

Where This Configuration Fits

Adjustable configurations are useful when a fixed elbow would stop in the wrong orientation or when a branch must align with an existing tube route. They do not remove the need for correct support and stress-free tube alignment.

Details to Include in Your Enquiry

  • Choose a standpipe connection or a swivel cone connection; they assemble differently.
  • Identify whether the adjustable connection is on the branch or the run of a tee.
  • Allow tool access for final tightening after the fitting has been positioned.
  • Swivel adjustment is for assembly orientation unless continuous rotation is explicitly approved.

Sizes, Materials and Supplied Condition

Specify the tube outside diameter, LL/L/S series, material and every connection. The overall catalogue covers 4–42 mm tube, but an individual configuration may have a narrower range. Carbon steel, 316L and 316Ti can be included in an enquiry, subject to confirmation of the supplied item.

State whether you require complete fittings or bodies only. Include working pressure, peak pressure, temperature, medium and any certificate requirements so the complete assembly can be checked.

Select materials, seals and pressure capability →

Technical Selection Guides

Questions Answered

How do I specify adjustable fittings?

Identify the configuration, tube diameter and series, all connection threads and seals, material, quantity and operating conditions. Send a marked sketch when port positions or different end sizes matter.

Are the catalogue dimensions suitable for final fabrication?

Use them to identify and enquire about the configuration. Obtain the order-specific drawing and confirmed pressure rating before fabrication or installation.

SPECIFY YOUR CONNECTION

Request the Right Fitting

Send the connection details and operating conditions. Fluidline can confirm the supplied configuration, availability and supporting documentation with your quotation.

+27 11 312 9339
ram@fluidline.co.za · brett@fluidline.co.za

Fluidline Products (Pty) Ltd
Unit 4 Acacia Park, Capital Hill Commercial Estate, Le Roux Avenue, Midrand, 1685, South Africa
Fluidline contact details →
DIN Fittings and Technical Enquiries

Send your enquiry directly. We save your requirements and email Brett and Ram so they can respond. Privacy information.